What Should A Good Maf Sensor Read Lb Min. Web appears that the maf is reading low at higher tp % and pcm may be adding fuel for this reason. I believe it is supposed to be 0.00 and it ask an expert car questions ford repair i'm.
MAF Sensor Testing YouTube
Web from the reading i was doing a few months back, some folks have said that flywheel hp=lb/min x 10 (roughly). Web this tutorial will show you how to test the maf on your gm car, pick up, or suv using a digital multimeter and without using a scan tool. It is installed between the air filter and the intake. I’m on interstate now cruising @77mph and maf is reading 15.1. I'm wondering what a normal maf reading would be at idle on an lnf? Web what should maf sensor read at idle lb? Since total fuel trim stays well within the 0 ±10% range throughout the. Web maf shows.22 lb/min at idle and jumps to 1.0 lb/min at 2000rpm and then tapers back to.7 or.8 lb/min. Web appears that the maf is reading low at higher tp % and pcm may be adding fuel for this reason. On average at idle one reads 3.17 khz and 1.34 lb/min where as the other reads lower at 2.77 khz and.82.
I’m on interstate now cruising @77mph and maf is reading 15.1. Have you ever had a maf out of range error code such as. On average at idle one reads 3.17 khz and 1.34 lb/min where as the other reads lower at 2.77 khz and.82. If the engine is idling correctly, the mass airflow (maf) sensor's pid value should read anywhere between 2 to 7. I’m on interstate now cruising @77mph and maf is reading 15.1. I believe it is supposed to be 0.00 and it ask an expert car questions ford repair i'm. Idle rpm = 20 kg/hr. Web i have 2 stock maf sensors both reading different. Web a visual inspection of the engine found this particular vehicle had a maf sensor bolted to the air filter box. Web there is the full throttle/full load test others use and that is measure the maf sensor readings at full throttle in 2/3 gear and the engine at maximum rpm. This looks suspect especially compared to all my other.
